References

1. Jacob, B., E.J. O'Brien, and S. Jehaes, Weigh-in-Motion of Road Vehicles—Final report of the COST 323 Action, LCPC, Paris, France, 2004.
2. Caldwell, H., et al., Freight Transportation: The European Market, FHWA-PL-02-009, Federal Highway Administration, Washington, DC, 2002.
3. Jarema, F., et al., European Traffic-Monitoring Programs and Technologies,Federal Highway Administration, Washington, DC, 1997.
4. Dougan, C., et al., Advanced Transportation Technology,Federal Highway Administration, Washington, DC, 1994.
5. Lord, B., et al., Highway/Commercial Vehicle Interaction: North America and Europe,Federal Highway Administration, Washington, DC, 1996.
6. Hartman, K., et al., Commercial Vehicle Safety: Technology and Practice in Europe,Federal Highway Administration, Washington, DC, 2000.
7. Transportation Research Board, "Emerging Models for Delivering Transportation Programs and Services: A Report of the Transportation Agency Organization and Management Scan Tour," Research Results Digest,Number 236, 1999.
8. Jacob, B., Weigh-in-Motion of Axles and Vehicles for Europe, Final Report of the Project WAVE,LCPC, Paris, France, 2002.
9. Jacob, B., and V. Dolcemascolo, "Spatial Repeatability of Dynamic Loading on a Pavement," in Pre-Proceedings of the Second European Conference on Weigh-in-Motion,eds. B. Jacob and E.J. O'Brien, Lisbon, Sept. 14–16, 1998, 291–302.
10. COST 323, Pre- and Post-Proceedings of the First European Conference on Weigh-In-Motion of Road Vehicles,ed. B. Jacob, ETH, Zurich, Switzerland, March 1995.
11. COST 323, Pre- and Post-Proceedings of the Second European Conference on Weigh-In-Motion,eds. E. O'Brien and B. Jacob, Lisbon, Portugal, September 1998.
12. Jacob, B., Proceedings of the Final Symposium of the Project WAVE(1996–99), Paris, France, May 6–7, 1999, Hermes Science Publications, Paris, France, 1999.
13. Van Loo, F., and R. Henny, "REMOVE, Requirements for Enforcement of Overloaded Vehicles in Europe," Fourth International Conference on Weigh-in-Motion, Taipei, Taiwan, 2005.
14. Rooke, A., Project Remove Work Packages 1–4,Final Report, 2002.
15. Doupal, E., and R. Calrerara, "Remote WIM Systems in Alpine Tunnels," First International Conference on Virtual and Remote Weigh Stations, Orlando, FL, 2004.
16. Calderara, R., D. Barz, and E. Doupal, "ITS and Overload Enforcement, Advanced Solutions for New WIM Applications," www.kistler.com/mediaaccess/en/920-337e-01.05.pdf, 2005.
17. Caprez, M., E. Doupal, B. Jacob, A. O'Conner, and E. O'Brien, "Test of WIM Sensors and Systems on an Urban Road," International Journal of Heavy Vehicle Systems, Volume 7, Issue 2/3, 2000.
18. Opitz, R., and R. Kühne, "IM (Integrated Matrix) WIM Sensor and First Trials," Fourth International Conference on Weigh-in-Motion, Taipei, Taiwan, 2005.
19. Kühnelt, G., "Development of an Axle Load Monitoring Network on the Federal Motorways in Germany," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.
20. Henny, R., "Procedures For Acceptance of WIM Systems for Automatic Enforcement of Overloading," Third International Conference on Weigh-in-Motion, Orlando, FL, 2002.
21. Van Loo, F., and R. Henny, "Acceptance of WIM Systems for Automatic Enforcement of Overloading," Ninth World Congress on Intelligent Transportation Systems, Chicago, IL, 2002.
22. Rambeau, S., C. Follin, and D. Stanczyk, "The French National WIM Network 'SIREDO,'" in Pre-Proceedings of the Second European Conference on Weigh-in-Motion,eds. E.J. O'Brien and B. Jacob, Lisbon, Portugal, Sept. 14–16, 1998, COST 323, Luxembourg, 47–54.
23. Blab, R., and B. Jacob, "Test of Multiple Sensor and Four Portable WIM Systems," International Journal of Heavy Vehicle Systems,Volume 7, Issue 2/3, 2000.
24. Stanczyk, D., S. Jehaes, B. Jacob, B. McCall, and E. O'Brien, "European Test of WIM Systems—Continental Motorway Test (CMT II) on the Motorway A31," Third International Conference on Weigh-in-Motion, Orlando, FL, 2002.
25. Labry, D., V. Dolcemascolo, and B. Jacob, "MS-WIM Arrays Design Optimisation," in Proceedings of the Fourth International Conference on Weigh-in-Motion,Taipei, Taiwan, Feb. 20–23, 2005.
26. Stanczyk, D., and Y. Marchadour, "Overloaded Vehicles Screening," in Proceedings of the Fourth International Conference on Weigh-in-Motion,Taipei, Taiwan, Feb. 20–23, 2005.
27. Henny, R.J., "Experimental Use of WIM with Video to Control Overloading," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.
28. Van Loo, F., "WIM-HAND, The Development of a Weigh-in-Motion System for Automatic Enforcement of Overloading," Eighth World Congress on Intelligent Transportation Systems, Sydney, Australia, 2001.
29. Stanczyk, D., and D. Labry, "Automatic Overloading Control Test Site in France," Fourth International Conference on Weigh-in-Motion, Taipei, Taiwan, 2005.
30. Brozovic, R., V. Vodopivec, and A. Znidaric, "Slovenian Experience in Using WIM Data For Road Planning and Maintenance," Fourth International Conference on Weigh-in-Motion, Taipei, Taiwan, 2005.
31. Jacob, B., "WAVE Weighs In: Europe's WIM Research Project," Traffic Technology International.
32. Jacob, B., and D. Labry, "Evaluation of Dynamic Effects of Heavy Vehicles on Bridge Fatigue," Proceedings of the Seventh International Symposium on Heavy Vehicle Weights and Dimensions,Delft, Netherlands, June 16–20, 2002.
33. Jacob, B., and T. Kretz, "Calibration of bridge fatigue loads under real traffic conditions," Proceedings of the IABSE Colloquium Basis of Design and Actions on Structures,International Association for Bridge and Structural Engineering, Delft, Netherlands, 1996, 479–487.
34. Federal Office for Spatial Development (ARE), Fair and Efficient: The Distance—Related Heavy Vehicle Fee (HVF) in Switzerland, http://www.are.admin.ch/dokumentation/publikationen/index.cfml?lang=en, Department of the Environment, Transport, Energy, and Communications, Bern, Switzerland, 2004.
35. Economic Commission for Europe, The International Convention on the Harmonization of Frontier Controls of Goods,Geneva, Switzerland, 1982.