Bibliography

AVV, Proposal for Acquisition Locations, Final Report, Adviesdienst Verkeer en, 1999.

Blab, R., and B. Jacob, "Test of Multiple Sensor and Four Portable WIM Systems," International Journal of Heavy Vehicle Systems, Volume 7, Issue 2/3, 2000.

Brozovic, R., V. Vodopivec, and A. Znidaric, "Slovenian Experience in Using WIM Data For Road Planning and Maintenance," Fourth International Conference on Weigh-in-Motion, Taipei, Taiwan, 2005.

Calderara, R., D. Barz, and E. Doupal, "ITS and Overload Enforcement, Advanced Solutions for New WIM Applications," www.kistler.com/mediaaccess/en/920-337e-01.05.pdf, 2005.

Caldwell, H., et al., Freight Transportation: The European Market, FHWA-PL-02-009, Federal Highway Administration, Washington, DC, 2002.

Caprez, M., E. Doupal, B. Jacob, A. O'Conner, and E. O'Brien, "Test of WIM Sensors and Systems on an Urban Road," International Journal of Heavy Vehicle Systems,Volume 7, Issue 2/3, 2000.

Caprez, M., "WIM Application to Pavements," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

Collop, A.C., B. Al-Hakim, N.H. Thom, and W.G. Lloyd, "The Use of WIM Data in Traffic Assessment," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

COST 323, Pre- and Post-Proceedings of the First European Conference on Weigh-In-Motion of Road Vehicles,ed. B. Jacob, ETH, Zurich, Switzerland, March 1995.

COST 323, Pre- and Post-Proceedings of the Second European Conference on Weigh-In-Motion,eds. E. O'Brien and B. Jacob, Lisbon, Portugal, September 1998.

COST 323, Weigh in Motion of Road Vehicles, Final Report,Version 3.0, August 1999.

De Henau, A., "Weigh-in-Motion of Road Vehicles in Belgium," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

Dolcemascolo, V., B. Jacob, B. Boutillier, and L. Reversat-Brulant, "Accuracy Assessment of a Low Speed Weigh-in-Motion System," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

Dougan, C., et al., Advanced Transportation Technology,Federal Highway Administration, Washington, DC, 1994.

Doupal, E., and R. Calrerara, "Remote WIM Systems in Alpine Tunnels," First International Conference on Virtual and Remote Weigh Stations, Orlando, FL, 2004.

Doupal, E., "Protection of Roads and Bridges: Part 1—Are We Going to Stay at the Back?" and "Part 2—WIM in Europe," Road Horizon,2003.

Economic Commission for Europe, The International Convention on the Harmonization of Frontier Controls of Goods,Geneva, Switzerland, 1982.

Federal Office for Spatial Development (ARE), Fair and Efficient: The Distance—Related Heavy Vehicle Fee (HVF) in Switzerland, http://www.are.admin.ch/dokumentation/publikationen/index.cfml?lang=en, Department of the Environment, Transport, Energy, and Communications, Bern, Switzerland, 2004.

Hartman, K., et al., Commercial Vehicle Safety: Technology and Practice in Europe,Federal Highway Administration, Washington, DC, 2000.

Henny, R., "Procedures For Acceptance of WIM Systems for Automatic Enforcement of Overloading," Third International Conference on Weigh-in-Motion, Orlando, FL, 2002.

Henny, R.J., "Experimental Use of WIM with Video to Control Overloading," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

Henny, R.J., R. Nieuwsma, and C.B.W. Drouen, Proposal for Acquisition of Locations, Weigh-In-Motion with Video,DWW-Publication: W-DWW-99-014, Ministry of Transport, Public Works, and Water Management, The Hague, Netherlands, 1999.

Jacob, B., and V. Dolcemascolo, "Spatial Repeatability of Dynamic Loading on a Pavement," in Pre-Proceedings of the Second European Conference on Weigh-in-Motion,eds. B. Jacob and E.J. O'Brien, Lisbon, Sept. 14–16, 1998, 291–302.

Jacob, B., and T. Kretz, "Calibration of bridge fatigue loads under real traffic conditions," Proceedings of the IABSE Colloquium Basis of Design and Actions on Structures,International Association for Bridge and Structural Engineering, Delft, Netherlands, 1996, 479–487.

Jacob, B., and D. Labry, "Evaluation of Dynamic Effects of Heavy Vehicles on Bridge Fatigue," Proceedings of the Seventh International Symposium on Heavy Vehicle Weights and Dimensions,Delft, Netherlands, June 16–20, 2002.

Jacob, B., Proceedings of the Final Symposium of the Project WAVE (1996–99),Paris, France, May 6–7, 1999, Hermes Science Publications, Paris, France, 1999.

Jacob, B., "WAVE Weighs In: Europe's WIM Research Project," Traffic Technology International.

Jacob, B., Weigh-in-Motion of Axles and Vehicles for Europe, Final Report of the Project WAVE,LCPC, Paris, France, 2002.

Jacob, B., and E. O'Brien, "WAVE, A European Research Project on Weigh-in-Motion," National Traffic Data Acquisition Conference, 1996.

Jacob, B., E. O'Brien, and B. McCall, "Output and Follow-up of the European Research Project 'WAVE,'" Third International Conference on Weigh-in-Motion, Orlando, FL, 2002.

Jacob, B., E.J. O'Brien, and S. Jehaes, Weigh-in-Motion of Road Vehicles—Final report of the COST 323 Action, LCPC, Paris, France, 2004.

Jacob, B., "Application of Weigh-in-Motion Data to Fatigue of Road Bridges," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

Jacob, B., "Assessment of the Accuracy and Classification of Weigh-in-Motion Systems: Part 1–Statistical Background, Heavy Vehicle Systems, International Journal of Vehicle Design, Volume 7, Number 2, 2000.

Jacob, B., E. O'Brien, and W. Newton, "Assessment of the Accuracy and Classification of Weigh-in-Motion Systems: Part 2—European Specification, Heavy Vehicle Systems," International Journal of Vehicle Design,Volume 7, Number 2, 2000.

Jacob, B., B. McCall, and E.J. O'Brien, eds.., Pre-Proceedings of the Third International Conference on Weigh-in-Motion, Orlando, FL, published by Iowa State University, Ames, IA, May 2002.

Jacob, B., and E.J. O'Brien, "Weigh-in-Motion: Recent Developments in Europe," Fourth International Conference on Weigh-in-Motion, Taipei, Taiwan, 2005.

Jarema, F., et al., European Traffic-Monitoring Programs and Technologies,Federal Highway Administration, Washington, DC, 1997.

Jehaes, S., B. Hallstrom, B. Jacob, B. McCall, and E. O'Brien, "Accuracy Analysis of WIM Systems for the Cold Environment Test," Third International Conference on Weigh-in-Motion, Orlando, FL, 2002.

Kühnelt, G., "Development of an Axle Load Monitoring Network on the Federal Motorways in Germany," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

Labry, D., V. Dolcemascolo, and B. Jacob, "MS–WIM Arrays Design Optimisation," in Proceedings of the Fourth International Conference on Weigh-in-Motion, Taipei, Taiwan, Feb. 20–23, 2005.

Lord, B., et al., Highway/Commercial Vehicle Interaction: North America and Europe,Federal Highway Administration, Washington, DC, 1996.

Marchadour, Y., "Weighing of Road Vehicles in France for Enforcement," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

Newton, W.H., "Enforcement Applications of Weigh-in-Motion," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

O'Brien, E., A. Gonzales, A. Znidaric, P. McNulty, B. Jacob, and B. McCall, "Testing of a Bridge Weigh-in-Motion System in Cold Environment Conditions," Third International Conference on Weigh-in-Motion, Orlando, FL, 2002.

O'Brien, E., B. Jacob, and A. DeHenau, "European Test Programme of WIM Systems: Cold Environment Test and Continental Motorway Test," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

O'Brien, E., B. Jacob, A. Znidaric, and W. Baumgartner, "Bridge Weigh-in-Motion Systems—An Overview," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

Opitz, R., and R. Kühne, "IM (Integrated Matrix) WIM Sensor and First Trials," Fourth International Conference on Weigh-in-Motion, Taipei, Taiwan, 2005.

Organisation for Economic Co-operation and Development, Dynamic Interaction between Vehicles and Infrastructure Experiment (DIVINE), Technical report, DSTI/DOT/RTR/IR6(98)1FINAL, OECD, www.oecd.org/dataoecd/8/57/2754406.pdf, 1998.

Rambeau, S., C. Follin, and D. Stanczyk, "The French National WIM Network 'SIREDO,'" in Pre-Proceedings of the Second European Conference on Weigh-in-Motion,eds. E.J. O'Brien and B. Jacob, Lisbon, Portugal, Sept. 14–16, 1998, COST323, Luxembourg, 47–54.

Rooke, A., Project Remove Work Packages 1–4,Final Report, 2002.

Siffert, M., V. Dolcemascolo, and R. Henny, "European Databases for WIM," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

Stanczyk, D., and D. Labry, "Automatic Overloading Control Test Site in France," Fourth International Conference on Weigh-in-Motion, Taipei, Taiwan, 2005.

Stanczyk, D., and Y. Marchadour, "Overloaded Vehicles Screening," in Proceedings of the Fourth International Conference on Weigh-in-Motion,Taipei, Taiwan, Feb. 20–23, 2005.

Stanczyk, D., and Y. Marchadour, "Overloaded Vehicles Screening," Fourth International Conference on Weigh-in-Motion, Taipei, Taiwan, 2005.

Stanczyk, D., "Overloaded Vehicle Screening for Enforcement," Third International Conference on Weigh-in-Motion, Orlando, FL, 2002.

Stanczyk, D., S. Jehaes, B. Jacob, B. McCall, and E. O'Brien, "European Test of WIM Systems—Continental Motorway Test (CMT II) on the Motorway A31," Third International Conference on Weigh-in-Motion, Orlando, FL, 2002.

Stergioulas, L., D. Cebon, and M. Macleod, "Enhancing Multiple-Sensor WIM Systems," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

Štor, D., "The Control of Axle Weight and Gross Vehicle Weight on Slovene Roads," Second International Conference on Weigh-in-Motion, Lisbon, Portugal, 1999.

Transportation Research Board, "Emerging Models for Delivering Transportation Programs and Services: A Report of the Transportation Agency Organization and Management Scan Tour," Research Results Digest,Number 236, 1999.

Van Lieshout, R.A., and M.H.M. Zoutenbier, Onderzoek naar Optimale Sensor Lay-out voor een MS-WIM-systeem,CQM report, E1687-01, 2000.

Van Loo, F., and R. Henny, "REMOVE, Requirements for Enforcement of Overloaded Vehicles in Europe," Fourth International Conference on Weigh-in-Motion, Taipei, Taiwan, 2005.

Van Loo, F., and R. Henny, "Acceptance of WIM Systems for Automatic Enforcement of Overloading," Ninth World Congress on Intelligent Transportation Systems, Chicago, IL, 2002.

Van Loo, F., "'WIM-HAND', The Development of a Weigh-in-Motion System for Automatic Enforcement of Overloading," Eighth World Congress on Intelligent Transportation Systems, Sydney, Australia, 2001.

Van Loo, H., and G. Visser, "Vehicle for Dynamic Calibration of a Multiple-Sensor WIM System," Fourth International Conference on Weigh-in-Motion, Taipei, Taiwan, 2005.

Van Loo, H., "WIM Projects in The Netherlands," Third International Conference on Weigh-in-Motion, Orlando, Florida, 2002.

Verschuren, R.M.A.F., Sensor Array for Weigh-In-Motion Test Site,TNO Automotive Report, 00.OR.VD.033.1/RMV, 2000.

WIM Concept Switzerland, Institute for Traffic Planning, Transportation Technology, Road- and Railway- Construction IVT–ETH, Zurich, Switzerland, March 2000.